Screed Mix calculator
Please use this calculator to estimate the quantity of screed
required for your project.
Need credit for your screed? We offer credit accounts for our regular trade customers!
BEST SCREED PRICES
NO WAITING, EXACT
SAME DAY / NEXT
Screed Calculator FAQs
When calculating the screeding quantity, several factors need to be taken into account. The screed is a layer of material applied over a base surface to create a smooth and level finish. To determine the quantity of screed required, follow these steps:
Measure the area: Start by measuring the length and width of the area that needs to be screeded. Multiply these measurements to obtain the total area in square units (e.g., square meters or square feet).
Determine the thickness: Decide on the desired thickness of the screed layer. This can vary depending on the project requirements, but typically ranges from 25mm to 50mm.
Calculate the volume: Multiply the area by the thickness to calculate the volume of screed required. If the area is measured in square meters and the thickness in millimeters, divide the result by 1000 to convert the volume to cubic meters.
Account for wastage: It’s important to factor in a percentage for wastage due to uneven application or spillage. Typically, a wastage allowance of 5-10% is recommended.
By following these steps and accounting for wastage, you can determine the approximate quantity of screed needed for your project. It’s always a good idea to consult with professionals or suppliers who can provide specific guidance based on the screed material you intend to use.
To calculate the material needed for screeding, follow these steps. Firstly, determine the area to be screeded by measuring the length and width. Next, decide on the desired thickness of the screed layer. Multiply the area by the thickness to obtain the volume. Convert the volume to the appropriate units (e.g., cubic meters). Lastly, account for wastage by adding a percentage allowance. Consult with professionals or suppliers for specific guidance on material requirements based on the type of screed you’re using.
Yes! Feel free to give us a call, if you’d like some extra assistance.
For complex or large-scale projects, it’s advisable to consult with professionals such as architects, contractors, or engineers. Their expertise can help ensure accurate calculations and provide valuable insights based on your specific project requirements.
Estimating the amount of concrete you need is a critical step in any construction project. By following the steps outlined in this blog post, you can accurately calculate the volume of concrete required for your project, avoid unnecessary expenses, and ensure the success of your endeavour. Remember, precision in calculating the amount of concrete will help you save time, money, and resources, ultimately leading to a successful construction experience.
Looking for the best screed supplier for your construction needs? Look no further than Singh Concrete! With our unmatched expertise, top-quality products, and exceptional customer service, we stand out as the leading screed supplier in the industry. Check out our reviews! They will highlight the reasons why Singh Concrete is your ultimate choice for all your concrete supply requirements.
Many of our customers enjoy free delivery. When we do have to charge for delivery – such as for very small deliveries, or where the delivery is travelling a long distance from one of our depots – we charge a very reasonable amount.
We offer both same and next day delivery and usually provide a two-hour delivery window.
The quantity of sand and cement required for 1 cubic meter of screed depends on the desired mix ratio. A common mix ratio is 1:3, which means one part cement to three parts sand by volume. For this mix ratio, you would need approximately 350 kilograms of cement and 1,050 kilograms of sand per cubic meter of screed. It’s important to note that mix ratios can vary depending on project specifications and the type of screed being used. It’s advisable to consult with experts or refer to manufacturer recommendations to ensure accurate calculations for your specific screeding needs.
The minimum thickness of a screed depends on various factors such as the type of flooring, substrate conditions, and intended use of the screeded area. In general, a minimum thickness of 25mm (1 inch) is often recommended for bonded screeds, where the screed is directly applied to the substrate. For unbonded or floating screeds, which are separated from the substrate by a layer of insulation, a minimum thickness of 50mm (2 inches) is commonly suggested. However, it’s crucial to consult relevant building codes, project specifications, and manufacturers’ guidelines to determine the specific minimum thickness requirements for your particular screeding application.